CD ROM Drive
This section describes how to remove and replace the CD ROM Drive.
NOTE
Prior to removing the CD ROM Drive, the Front, Top, and Right side panels
need to be removed. See the appropriate section(s) for removing and replacing
these components.
Removing the CD ROM Drive
1. Remove the two T-15 Torx screws securing the CD ROM drive to the front panel of the
workstation chassis.
Figure 2-21. CD ROM Drive in Place
T-15 Torx Screw
2. Remove the thin, metallic EMI (electromagnetic interference) cover, held in place by
metal tabs, from the top right front of the workstation above the CD ROM drive bay.
Chapter 2
Parts Removal and Replacement
CD ROM Drive
T-15 Torx Screw
29