Real Time Clock (Rtc) Module; Removing The Real Time Clock (Rtc) Module - HP Visualize J5000 - Workstation Manual

Visualize j class unix workstations

Hide thumbs Also See for Visualize J5000 - Workstation:

Table of Contents

Parts Removal and Replacement

Real Time Clock (RTC) Module

This section describes how to remove and replace the Real Time Clock (RTC) Module.

NOTE

Prior to removing the Real Time Clock (RTC) Module, the Front, Top, and

Side panels, PCI Retainer Clip, and the PCI I/O Cards need to be removed.

See the appropriate section(s) for removing and replacing these components.

Figure 2-44. Real Time Clock (RTC) Module

1. Carefully remove the RTC Module by pulling it out of the socket on the I/O board. The

clock module has a tight connection and may require a ﬁrm grip to remove it.

CAUTION

Dispose of the Real Time Clock (RTC) Module according to the

manufacturer's instructions.

Chapter 2

Table of Contents

Visualize j7000