HP Visualize J5000 - Workstation Manual page 51
Visualize j class unix workstations
Hide thumbs
Also See for Visualize J5000 - Workstation:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
Figure 2-46. J7000;s Open Left Side After Removing Air Guide
DIMM
Slots
2. You must remove the support bars in order to access the fans. The tab end of each
support bar fits into a slot on the system board fan wall. The other end is secured to the
rear air guide by T-15 Torx screws. Remove the T-15 Torx screws that secure the bar to
the rear air guide. Remove the T-15 Torx screws that secure the bars to the back of the
workstation. As you swing out each support bar, the tab end will come out of the slot on
the fan wall.
Chapter 2
Parts Removal and Replacement
System Board Cooling Fans
Support
Bars
51
Advertisement
Table of Contents
Need help?
Do you have a question about the Visualize J5000 - Workstation and is the answer not in the manual?
Questions and answers