System Power Switch; System Power Led; Storage Device Controls And Features - HP Visualize J5000 - Workstation Service Handbook

System Power Switch

Use the Power switch to power the system unit on and off.
CAUTION: Do not turn off the power to the workstation without
first performing the recommended shutdown proce-
dure. Not shutting down the workstation properly,
can damage the programs and data on the disk.
Using the proper shutdown method for the worksta-
tion and operating system ensures that remote users
receive shutdown notices, messages can be broad-
cast, or shutdown can be delayed for a specified
number of minutes.
If this workstation is running HP-UX 9.05, the rec-
ommended method of shutting down is using the
software command /etc/shutdown.
If this workstation is running HP-UX 10.0 or later,
follow the instructions in Using Your HP Workstation
to shut it down.

System Power LED

The Power Light Emitting Diode (LED) is located on the left side of the front panel.
It lights when the system unit power is on and flashes until the OS is booted. Once
the OS is booted, the LED remains on without flashing, indicating that a soft
shutdown is enabled.

Storage Device Controls and Features

This workstation allows up to two of the following internal storage devices:
CD-ROM drive, DDS tape drive, or floppy drive. The following sections describe the
controls and features of these devices.
1–4 Product Information