Removing The Lcd Unit - HP Visualize J5000 - Workstation Service Handbook

LCD Unit
Before removing the LCD (Liquid Crystal Display) unit, perform the following steps:
D
Open the system unit
D
Remove the CPU assembly
D
Disconnect the LCD cable from the CPU board
Push in the retainer clips and pull out the LCD display unit, as shown in Figure 5–29.
Figure 5–29. Removing the LCD Unit
NOTICE:
The LCD unit can be placed in the workstation
upside down. To prevent this, when installing the
unit, hold it with the word TOP showing on the top of
the unit as you place it in the workstation.
5–34 Field Replaceable Units