Cpu Assembly - HP Visualize J5000 - Workstation Service Handbook
J class workstation
Hide thumbs
Also See for Visualize J5000 - Workstation:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
CPU Assembly
This section describes how to remove the J Class CPU assembly.
To remove the CPU assembly, open the system unit and follow these steps:
1. Remove the two screws in the center of the CPU Assembly.
2. Pull the ejector latches on the left side, top and bottom of the CPU Assembly to
release the assembly from the internal connectors. See Figure 5–10.
Figure 5–10. Removing the CPU Assembly
3. Pull the CPU Assembly straight out and place on a flat surface. This assembly is
heavy. Move it slowly and be sure it is properly supported.
Field Replaceable Units
5–17
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Visualize J5000 - Workstation and is the answer not in the manual?
Questions and answers