Setting The Monitor Type - HP Visualize J5000 - Workstation Service Handbook

MONITOR INFORMATION
Slot # HPA
––––––––– –––––––– –––––––
graphics0 f8000000 Present
graphics1 f4000000 Empty
graphics2 f6000000 Empty
graphics3 fa000000 Present
Current Console Path:
Stable Store Console Path:
In this example, the graphics cards are configured as follows
Graphics slot 0
Graphics slot 1
Graphics slot 2

Setting the Monitor Type

Using the list in the example above, you can set the monitor type for graphics slot0
by typing the following:
Configuration Menu: Enter command > monitor graphics0
NOTICE: You can exit at this point by entering x, and the mon-
itor type will not be changed.
The screen displays the choice of supported monitors, similar to the following. Fol-
low the directions in the screen prompts and enter the monitor type you want to con-
figure (in this example, number 1).
State Resolution Frequency
–––––––––– –––––––––
1280x1024 75Hz
1024x1024 72Hz
GRAPHICS0
GRAPHICS0
Dual Graphics Card
Empty
Empty
Class
–––––
VESA
Enter
Boot Console 9–9