Removing Emi Plate; Emi Plate With No Fan Attached - HP Visualize J5000 - Workstation Service Handbook
J class workstation
Hide thumbs
Also See for Visualize J5000 - Workstation:
- Supplementary manual (214 pages) ,
- Owner's manual (212 pages) ,
- Handbook (178 pages)
Table of Contents
Advertisement
4. Set the drawer on a flat surface.
NOTICE:
The EMI plate may have a fan attached to it. If it
does go to step 7.
EMI Plate with no Fan Attached
5. Unscrew the captive screw holding the EMI plate at the back of the removable
drives and lift the plate up and out of the drawer, as shown in Figure 5–44.
6. Disconnect the SCSI and power cables from the drive.
7. Go to step 13.
Figure 5–44. Removing EMI Plate
Field Replaceable Units
5–49
Advertisement
Table of Contents
Troubleshooting
