System Unit Front Panel Controls - HP Visualize J5000 - Workstation Service Handbook

J class workstation
Hide thumbs Also See for Visualize J5000 - Workstation:
Table of Contents

Advertisement

Internal Storage Devices:
– Fast, Wide SCSI Hard Disk Drives – up to two:
1.0 GB Drive
2.0 GB Drive
– Single-Ended SCSI Removable Media – up to two
CD-ROM Drive
2.0–8.0 GB, 4-mm DDS Tape Drive
SCSI Floppy Drive
Standard Network:
– Ethernet IEEE 802.3 AUI Thicknet
or
– RJ45, UTP Twisted Pair
Standard I/O:
– One SCSI-2: Single-Ended, 8-bit (for removable devices)
5 MB/sec synchronous,1.5 MB/sec asynchronous ALT-1, 50-pin, high density
SCSI-2 connector
– One SCSI-2: Fast,Wide Differential (for hard disk drives)
20 MB/sec synchronous
68-pin, high-density SCSI-3 P connector
– Two Serial Interfaces RS232C, 9-pin male
– One Parallel Interface Centronics, BUSY handshake 25-pin female
EISA/GSC: 5 slots total; 4 EISA and 3 GSC that can be used as follows:
2 individual EISA, 1 individual GSC, and 2 combination EISA or GSC
Keyboards:
– PS/2 Keyboard
or
– ITF Keyboard (also known as HP HIL)

System Unit Front Panel Controls

Figure 1–1 shows the location of the system unit front panel controls.
1–2
Product Information

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 j class

Table of Contents