HP Visualize J5000 - Workstation Service Handbook page 55

Window 2
While the pdh is being verified, the following message is displayed:
ZZZZ YYYY
Selftest Sys Bd
Window 3
After the pdh is verified, the selftest is executed. The display changes to:
ZZZZ YYYY
Selftest
Window 4
When the selftest is complete, the message (once the console is found) is:
ZZZZ YYYY CPUXX
AAAAAAAA console
where AAAAAA – RS-232A, RS-232B, or GRAPHICS (all fields left justi-
fied)
Window 5
When an attempt to boot is made, the following message is displayed once IPL is
successfully loaded and launched:
ZZZZ YYYY CPUXX
BBBBBBBBBBBBBBBB
where BBBBBBBBBBBBBBBB – first 16 characters of the model string
from stable store (e.g. 9000/J200)
If the system encounters an FLT code while the system is booting, the FLT code is
interpreted and one of the following messages is displayed:
FLT CODE MESSAGES
1. Selftest
2. Selftest
3. Selftest
4. Selftest SIMM XX
5. Selftest Mem Sys
6. Selftest Graph X
7. Unexp. Trap
8. HPMC occurred !
By default, if a FRU cannot be located from the FLT code, message 1
(Selftest Sys Bd) is displayed.
<– line 1
<– line 2
<– line 1 – ' ' flashes with Z Y field change
<– line 2
<– line 1 – ' ' flashes with Z Y field change
<– line 2
<– line 1 – ' ' flashes with Z Y field change
<– line 2
Meaning of X
Sys Bd
(0 or 1)
cpu X
EISA X (0 to 4)
(SIMM pair 0 to 7)
(0 to 2)
(0 to 28)
XX
Troubleshooting 4–5