Device Power Sequence Interconnect Bays Tab; Date And Time Screen - HP Integrity Superdome 2 User Manual

Interconnect Bays tab
Interconnect bays by default are for auto power-on. Enabling and setting a power delay for an
interconnect bay delays the power on of that bay following an enclosure power cycle event.
Column
Bay
Device
Enabled
Delay

Device Power Sequence Interconnect Bays tab

Column
Bay
Device
Enabled
Delay
Click the Apply button to save the settings.

Date and Time screen

Static date and time settings
The date and time are static and not updated in real-time. The date and time can only be set if
NTP is disabled.
Box
Date
Time
Time Zone
78 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
Possible value
yyyy-mm-dd
mm is an integer from 1 to 12
dd is an integer from 1 to 31
hh:mm:ss (24-hour time, ss is optional)
hh is an integer from 0 to 23
mm is an integer from 0 to 59
ss is an integer from 0 to 59
Time zone settings
"Africa time zone settings" (page 184)
"Americas time zone settings" (page 184)
"Asia time zone settings" (page 186)
"Universal time zone settings" (page 186)
"Oceanic time zone settings" (page 187)
Description
Bay number of the device.
The type of device in the bay, or Absent if no device is
installed in the bay
Enables power sequencing, disables power sequencing,
or does not allow powering on of the device if No Poweron
is selected.
The amount of delay, in seconds, before the device powers
on.
Description
Bay number of the device
The type of device in the bay or Absent if no device is
installed in the bay
Enables power sequencing, disables power sequencing,
or does not allow powering on of the device if No Poweron
is selected.
The amount of delay, in seconds, before the device powers
on. Possible delay values are 1 to 3600.
Description
The date assigned to the enclosure
The time assigned to the enclosure
The time zone assigned to the enclosure