Disabling Network Protocols; Upgrading The Integrated Administrator Firmware - HP Bc1500 - BladeSystem - Blade PC User Manual

Performing Advanced Functions

Disabling Network Protocols

To modify the supported communications protocols of the enclosure using the Webbased user
interface:
1. Click the Enclosure tab.
2. Click Network Configuration in the left panel.
3. Select the appropriate radio buttons in the Protocols area.
4. Click Apply.
To modify the supported communications protocols of the enclosure using the CLI, choose from
among the following commands:
■
To disable http/https communication, type:
Disabling http/https causes the users to lose access to the Web-based user interface.
■
To disable automatic time updates, type:
■
To disable SNMP communication, type:
■
To disable Secure Shell communication, type:
Disabling Secure Shell causes the users to lose access to the Web-based user interface.
■
To disable telnet communication, type:

Upgrading the Integrated Administrator Firmware

The firmware associated with the Integrated Administrator can be upgraded remotely using the
CLI using the management (10/100 Ethernet) connector located on the rear panel of the
enclosure.
UPDATE IMAGE <url>
The <url> can be any of the following:
■
http://host/path
8-6
DISABLE WEB
DISABLE NTP
DISABLE SNMP
DISABLE SECURESH
DISABLE TELNET
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide