Modifying Or Deleting Permit Ids - Kyocera KM-C2520 Operation Manual

1
Press the [Register] key. The Register
screen will appear.
2 Press the [TX/RX Restrict.] key.
3
Press the [Permit ID No.] key.
4
Press an unregistered key. The
information will be displayed for all keys
that have already been registered.
5 Use the numeric keys to enter the desired 4-digit Permit ID. If you want to change the entered
number, use the [ ] and/or [ ] keys to move the cursor to the desired location.
6 Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 4. If you want to continue registering other Permit IDs, repeat steps 4 through 6. If you are
finished registering Permit IDs, press the Reset key.

Modifying or Deleting Permit IDs

NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Perform steps 1 through 3 of Registering New Permit IDs on page 5-52.
Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application
Register in TX/RX Restriction list.
Item option
Permit Permit
FAX No. ID No.
Register in TX/RX Restriction list.
Permit List
#01 0101.
#02 0202.
#03
Other Features of this Fax
Register Print Report
Encryption
key
Network
FAX
Register Print Report
Reject
FAX No.
#04
#05 5555.
Memory
OCT-11
5-53