Modifying Or Deleting F-Code Relay Boxes - Kyocera KM-C2520 Operation Manual

Other Features of this Fax
2
9 Press the [Finish dest. Set] ([Dest. set]) key.
10
Select whether or not you want the
received documents to be printed out at
your fax (press the [On] key to have
them printed and the [Off] key to stop
print out), and whether or not you want
send a Transmission Report regarding
the results of the final transmissions to
the initial transmitting station (press the
[On] key to send a report and the [Off]
key to not send a report.).
11 Press the [Next] key.
If you selected to send a Transmission Report to the initial transmitting station, go to the next step. If
you selected NOT to send a report, proceed directly to step 14.
12 Enter the fax number of the initial transmitting station.
NOTE: You can use the numeric keys, one-touch keys and Chain dial keys to enter the fax number.
13 Press the [Finish dest. Set] ([Dest. set]) key.
14
Check the registered information.
Each item can be modified.
15 Press the [OK] key. The message display will return to the same screen as was displayed in step 4.
If you want to continue registering other F-Code Relay Boxes, repeat steps 4 through 15. Once you
are finished registering F-Code Relay Boxes, press the Reset key.

Modifying or Deleting F-Code Relay Boxes

Perform the following procedure when you want to add or delete final destinations or change other
information registered under any F-Code Relay Box, as well as when you want to completely delete
one of those boxes.
NOTE: In order to modify the contents of or completely delete an F-Code Relay Box, it is necessary
to enter the corresponding F-Code password during the procedure.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1
Perform steps 1 through 3 of Registering New F-Code Relay Boxes on page 5-26.
2
Press the key which displays the
subaddress for the F-Code Relay Box
you want to modify or delete.
5-28
If you entered the fax number with the numeric keys, press the [Next destinat.] ([Next dest.])
key.
Register box
Subaddress relay box 02.
Local print/return
Print Here Return report
On On
Off Off
Register box
Subaddress relay box
3333.
8888.
0715.
Back