Kyocera KM-C2520 Operation Manual page 121

The receiving party must...have a facsimile that has the same F-Code Based Confidential
Communication capabilities as your fax machine. In addition, they must register, in advance, the
corresponding box (in this fax, called the 'F-Code Confidential Box') in their fax, inform you (the
transmitting party) of the registered number (in this fax, a 4-digit number called the 'subaddress') for
that box, and enter that number and the corresponding password during the procedure to print out
the received documents. (Refer to Printing Out Documents from an F-Code Confidential Box on
page 5-20.)
NOTE: If you designate a time for the transmission to begin, the Direct Feed Transmission mode
will not be available.
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode settings.
1 Set the documents you want to transmit.
2 Use the numeric keys to enter the destination party's fax number.
NOTE: You can also enter the fax number using one-touch keys that have been designated for
F-Code Based Communication as well. If you do use such a one-touch key, press the Start key and
the transmission operation will begin automatically.
3 Press the [Subadd.] key.
4 Press the [On] key.
5
Use the numeric keys to enter the
appropriate subaddress.
NOTE: This subaddress is required during an F-Code Based Communication in order to designate
the box in the destination party's fax. It can be up to 20 digits in length and can include any
combination of the numerals 0 - 9 and the symbols * and #.
You can use the [ ] and/or [ ] keys to move the cursor to a desired location, and you can clear the
entered number by pressing the [Delete] key.
for fax transmission.
key to transmit
1234_.
Delete Pause Space
8½×11"
Delayed TX
Duplex Orig. size
TX setting
Application
Register
Ready for fax transmission.
Subaddress TX
Enter using # key.
Subaddress
Off
Password
On
Other Features of this Fax
Memory usage:
OCT-11-2005 16:00
Dest.
check
Subadd. Next des
Re-dial
On-hook
Normal Regular
Memory TX
Orig image Exposure
quality mode
Auto RX
Print Report
Back
_.
Delete
.0%
Memory
OCT-11
(MAX. 20 dig
(MAX. 20 dig
5-19