Modifying Or Deleting Permit Ids - Kyocera KM-3035 Operation Manual

Section 5 Other Features of this Fax

Modifying or Deleting Permit IDs

* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Perform steps 1 through 3 of "Registering New Permit
IDs" on page 5-45.
2
Press the key which displays the Permit ID you want to
modify or delete.
(inch)
(metric)
3
If you want to delete the registered Permit ID, press the
"Delete" key and then go to the next step. If you want to
modify the registered information, press the "Change
contents" key and then go directly to step 5.
(inch)
(metric)
> Deleting a Permit ID
4
Press the "Yes" key.
The message display will return to the same screen as
was displayed in step 2. If you are finished deleting
Permit IDs, press the Reset key.
5-46
> Modifying information
5
Press the Stop/Clear key to delete the old number and
then enter the new Permit ID, or use the " " and/or " "
keys to move the cursor to a desired location and reenter
the number as desired.
(inch)
(metric)
6
Press the "Confirm" key.
The message display will return to the same screen as
was displayed in step 2. Once you are finished modifying
and/or deleting Permit IDs, press the Reset key.