Turning Tti Transmission On/Off (Tti Setting) - Kyocera KM-C2520 Operation Manual

Turning TTI Transmission ON/OFF (TTI setting)

The TTI (Transmit Terminal Identifier) refers to information – such as the time of the transmission,
the number of pages, your station name and fax number, etc. – that is automatically sent to the
receiving party's fax and printed out on the received documents. With this fax, you can select here
whether or not that TTI information will be sent to the receiving party's fax, and – if it is – whether it
will be printed inside or outside the border of the transmitted page.
NOTE: Prior to operation, check the message display to make sure that the touch panel is in the
initial mode for fax operation. (Refer to What is the Initial Mode? on page 1-11.)
If you want to cancel the procedure part way through, press the Reset key. The touch panel will
return to the initial mode screen.
1 Press the System Menu/Counter key. The System
Menu / Counter screen will appear.
2
Press the [FAX Default] key.
3 Press the [ ] cursor key until TTI is highlighted and then press the [Change #] key.
4 If you want your TTI information to be
sent to the other party, press the desired
location where you want it to be
printed.If you do NOT want it to be sent,
press the [Not Printed] key.
5
Press the [Close] key. The message display will return to the same screen as was displayed in step
3.
6
If you are finished making settings, press the Reset key to return to the initial mode.
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
System Menu / Counter
TTI
Outside
page
Inside
page
Not
Printed
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back
1-7