Modifying Or Deleting Encryption Boxes - Kyocera KM-C2520 Operation Manual

9
To use the NW-FAX Reception function, press the [On] key. If you don't use the NW-FAX Reception
function, press the [Off] key and go to the next step.
10 Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 4. If you want to continue registering other Encryption Boxes, repeat steps 4 through 10. Once
you are finished registering Encryption Boxes, press the Reset key.

Modifying or Deleting Encryption Boxes

NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1 Perform steps 1 through 3 of Registering New Encryption Boxes on page 5-61.
2 Press the key which displays the box
number for the Encryption Box you want
to modify or delete.
3
Enter the Box ID (4-digits) for that
Encryption Box.
4 Press the [Confirm] key.
5 If you want to delete the registered
Encryption Box, press the [Delete] key
and then go to the next step. If you want
to modify the registered information,
press the [Change contents] key and
then go directly to step 7.
> Deleting an Encryption Box
6 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2.
Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key.
> Modifying registered information
7 The currently registered information will be displayed. Refer to Registering New Encryption Boxes
on page 5-61 in order to modify that information.
8
Press the [Confirm] key. The message display will return to the same screen as was displayed in
step 2. Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key.
Register box
Encryption box
9876.
0352.
Register box
Encryption box 02.
Box ID confirmation
Enter box id using # key.
_.
( 4 digits)
Register box
Encryption box 02.
Contents change/del.
Box. No. 0352.
Box. ID 0352.
Change
contents
Other Features of this Fax
Back
Back
Delete
5-63