Modifying Or Deleting Permit Ids - Kyocera KM-1650 Operation Manual

Other Features of this Fax
8 Use the keypad to enter the desired Permit ID.
Each Permit ID is a 4-digit number that can include any
combination of the numerals 0 – 9.
9
Press the Enter key. Registration of that Permit ID is complete.
> If you want to continue registering other Permit IDs, repeat steps 6 – 9.
> If you are finished registering Permit IDs, press the Reset key. The operation panel will return to

Modifying or Deleting Permit IDs

Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1
Perform steps 1 – 5 of Registering New Permit IDs on page 5-51.
2 Press the
be modified or deleted.
3 Perform the following modification or deletion procedure.
> Modifying the registered information
(1) Press the Enter key.
(2) Use the keypad to enter the new Permit ID to be
(3) Press the Enter key.
> Deleting the Permit ID number
Press the Stop/Clear key. The selected Permit ID
number will be deleted.
4 If you are finished modifying and/or deleting Permit IDs, press the Reset key. The operation panel
will return to the initial mode settings.
If you want to continue modifying and/or deleting other Permit IDs, return to step 2.
5-52
the initial mode settings.
key or the
Press the Stop/Clear key to clear the currently displayed number from the message display.
registered.
Each Permit ID is a 4-digit number that can include
any combination of the numerals 0 – 9.
key to select the Permit ID to
#1:0000
Program Permit ID No.
Permit ID No.:
End
#1:4444
#2:
#1:4444
Program Permit ID No.