Setting The Number Of Rings [Auto Fax Reception] (Number Of Rings Setting) - Kyocera KM-C2520 Operation Manual

Various Settings and Registration

Setting the Number of Rings [Auto Fax Reception] (Number of Rings setting)

The number of times the fax will [ring] before an incoming call is answered in the Auto Fax
Reception mode, the Auto FAX/TEL Switching mode [this setting is not available in metric models]
or the TAD Reception mode can be set here to any number between 1 and 15.
NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel
will return to the initial mode settings.
1
Press the System Menu/Counter key. The System
Menu / Counter screen will appear.
2 Press the [Fax Default] key.
3
Press the [ ] key until # of Rings is highlighted.
4
Press the [Change #] key.
5 Use the [+] or [-] key to select the
number of rings before an incoming call
is answered in each mode: the Auto Fax
Reception mode, the Auto FAX/TEL
Switching mode (this setting is not
available in metric models) and the TAD
Reception mode.
6
Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial
mode.
7-6
System Menu / Counter
System Menu
Copy FAX
Default Default
Scanner Printer
Default Default
Machine Document
Default Management
System Menu / Counter
# of Rings
For fax RX Auto Fax/Tel SW
(01-15)
02.
Job
Language
Accounting
MP tray BOX
Setting Management
Register Print
Orig. Size Report
Back
For answering tel.
(00-15) (01-15)
00. 15.