Fax Operation (Various Functions)
4
Press the [Chain] key.
5
Use the numeric keys to enter the
desired chain dial number. (Maximum 32
digits)
NOTE: [ ] and [ ] cursor keys...Use to move the cursor.
[Delete] key...Press to delete the character that the cursor is currently under. (When the cursor is at
the last space, the previous character will be deleted.)
[Space] key...Press to enter a space.
[Pause] key...Press to enter a slight pause (indicated by a hyphen) at that point in dialing.
6
Press the [Next] key.
7
Enter the desired name for the chain dial key. (Maximum 20 characters)
NOTE: In order to enter characters, refer to Entering Characters on page 2-15.)
8
Check the registered information. If you
want to change any portion of it, press
the key that corresponds to the desired
item and change the information as
desired.
9
To register this chain dial key with the entered information as is, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue registering other one-touch keys, repeat steps 3 through 9.
10
If you are finished making settings, press the Reset key to return to the initial mode. (C) will be
displayed next to the registered speed-dial key.
3-14
Register the dial.
Dial type
One-touch
33600bps
Program
key
Group
Chain
Register the dial.
Chain
0003.
Fax #
Enter using # key.
(MAX. 32 digits)
Pause
Space
Register the dial.
Chain
0003.
Regist'd contents cnf
Press confirmation key after checking registered contents.
800
Name
FREE.
Back
Back
Delete