Transform Key; Margins - Xerox 6030 User Manual

Margins

Xerox 6030/6050 Wide Format Copy System

Transform key

The Transform feature contains the following menu choices:
MARGINS - Allows you to adjust the dimensions of the margins
around the image. By entering positive margins, blank space is
inserted around the image. By entering negative values,
unwanted parts of the image can be cropped.
JUSTIFICATION - Allows you to adjust the position of the image
on the media.
TRANSFORM - Allows you to request transformation of the
scanned image into a mirror image, a negative photographic
inversion, or both.
NOTE: The image can also be rotated. Refer to "Imaging" in the "Copy
Options" section for further information about image rotation.
To access the TRANSFORM MENU:
1. Press the Transform key. The TRANSFORM MENU screen is
displayed. The selected option is highlighted.
TRANSFORM MENU
MARGINS
JUSTIFICATION
TRANSFORM
2. Press the Previous or Next key to highlight the desired option.
3. Press the Enter key to select the highlighted option. The screen
for the selected option is displayed.
The MARGINS option of the TRANSFORM MENU allows you to select
the dimensions for the margins that surround an image. These margins
are referred to as the lead, left, right and trail edges.
NOTE: Margins can only be adjusted when the Xerox 6030/6050 Wide
Format Copy System is in the COPY mode.
The example below illustrates an image entering the SCAN SYSTEM
and the orientation of the image margins.
Right image
edge
Scanner
Lead
edge
Left image
edge
Trail
edge
Special features keys 73