Xerox 6030 User Manual page 87

Xerox 6030/6050 Wide Format Copy System
5. To view a sample of the file before it is scan to a file, Press the
Sample key on the Control Panel. Use the Next or Previous key
to highlight SCAN TO PRINTER and press the Enter key. Press
the Exit key to return to the READY screen, then press Start. A
copy will be sent to the printer.
6. When the SCAN SYSTEM Control Panel displays READY TO
SCAN, select your desired scanning resolution using the Next
and Previous keys.
NOTE: When making a color scan, be sure to select Color with the
arrow key under Image Quality on the SCAN SYSTEM Control Panel.
The Normal and Photo lights will be
7. Select the Image Quality, Original, Type by pressing the arrow
button located under Type. When the Type (Normal, Line,
Photo,or Color) is selected the appropriate SCAN OPTION
(NORMAL, LINE, PHOTO, or COLOR) is displayed. Use the
Next, Previous, and Enter keys to navigate to and through the
avaliable options on the screen. Press the Enter key to confirm
your choice(s). For additional information refer to the "Image
Quality, Scan Mode" section of this manual.
8. Insert your original document face down and centered on the
feed tray of the SCAN SYSTEM.
9. Gently move your document forward until the SCAN SYSTEM's
feed rolls engage the document's leading edge.
10. If prompted to do so, enter the desired scanning width and press
Enter.
11. As your document is automatically fed into the SCAN SYSTEM,
the resulting image is stored as a file in the Scan Directory on
the system AccXES Print Server's hard drive. The image can be
retrieved at your workstation using the Retrieve Tool of the
AccXES Client Tools.
NOTE: You may have to press the Start button if the configuration (for
Auto Scan) has been changed from the factory default.
on.
Scanning to the Network (SCAN mode) 85