Image Quality Area - Xerox 6030 User Manual

Wide format printer with scan system
Hide thumbs Also See for 6030:
Table of Contents

Advertisement

Image Quality Area

16 Getting to know the WIDE FORMAT COPY SYSTEM
7. When the values for WIDTH and LENGTH are correct, press the
Exit key to return to the READY screen.
Preset
Preset allows you to select a predefined length to which the roll media
should be cut during printing. The associated width specification will
depend on the Media Source selection. If the Media Source selection
is set to Auto, the system will select the roll of media that best matches
the width specification. If Media Source is set to R1, R2, R3, or R4; the
system will use the selected roll regardless of the width specification.
To select the Preset mode:
1. Press the key beneath Output Format until the Preset indicator
lamp illuminates. The PRESET OUTPUT FORMAT screen is
displayed.
NOTE: If the indicator lamp is already lit, press the key once to display
the screen.
PRESET OUTPUT FORMAT
SELECT:
8.5 X 11 ANSI A
2. Press the Previous or Next key to select an item from the list.
NOTE: Formats can be added or removed from this list. Refer to
"Custom Media Formats" in the "Main Menu" section for more
information.
3. Press the Enter key to confirm the choice and return to the
READY screen.
Synchro
When the Synchro mode is selected, the length of the original is
measured as it passes through the Scan System and automatically cuts
the media at the Printer to match the length of the original document.
Synchro is the factory default. To select the Synchro mode, press the
key beneath Output Formats until the Synchro indicator lamp
illuminates.
The Image Quality area of the Scan System Control Panel allows you to
make corrective adjustments to the image and extract the best possible
copy quality from an original document. It contains the Type,
Background Suppression, and Copy options.
The illustrations below depict the Image Quality portion of the Control
Panel for AccXES software version 10.0 and SCAN SYSTEM firmware
version 3.0.9 or higher.
Xerox 6030/6050 Wide Format Copy System

Advertisement

Table of Contents
loading

This manual is also suitable for:

6050

Table of Contents