Xerox 6030 User Manual page 50

48 Making copies
Some documents will always exit to the rear at the completion of the
scan regardless of the DOCUMENT RETURN setting. These documents
include:
Thick documents
Documents longer than 5 feet (1.52 meters)
Documents over 36 inches (914 mm) in width
MODE:
MANUAL
The user must enter the width of the document manually, and very
carefully center the document when inserting it into the SCAN SYSTEM.
The document is prescanned in this mode.
AUTOWIDTH
AUTOWIDTH enabled is the default setting. When AUTOWIDTH is
selected, the SCAN SYSTEM automatically detects the width of the
document.AUTOWIDTH/AUTOCENTER. The document is prescanned in
this mode.
When AUTOWIDTH/AUTOCENTER is enabled, the SCAN SYSTEM
automatically centers the image and automatically detects the document
width.
PRODUCTIVITY - ANSI
PRODUCTIVITY is only available on SCAN SYSTEMs with AccXES
firmware 10.0 or higher, SCAN SYSTEM firware 3.2.5 and the
Productivity Document Feed Tray that includes discrete width sensors.
PRODUCTIVITY - ANSI is the default. Other media type selections
include ARCH, ISO A, ISO B, JIS B and CUSTOM. These selections
must be made so that the sensors detect the correct width. This feature
eliminates the prescan width measurement, which increases document
throughput speed resulting in greater productivity. Use CUSTOM when a
copy job has mixed width sizes. CUSTOM requires standard media sizes
to be entered in CUSTOM MEDIA FORMATS (Menu,
CONFIGURATION>COPY OPTIONS).
AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this
mode.
Reference Menu, CONFIGURATION>SCANNER CONTROL, MODE: for
additional information.
Xerox 6030/6050 Wide Format Copy System