Recent Fault List - Xerox 6030 User Manual

RECENT FAULT LIST

104 Main Menu
NOTE: The XXXX represents the Printer name 6030
MODEL: WIDE FORMAT XXXX
FIRMWARE: XXX
'
MODEL:
NOTE: This screen identifies the Finisher, if any. If there is no finisher,
the MODEL is displayed as NONE. If a Folder is connected, the
FINISHER screen displays the configuration of the connected Folder.
7. Press the Exit key to return to the SYSTEM DESCRIPTION
screen.
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu
displays the most recent faults related to the SCAN SYSTEM. Fault
messages are stored in the AccXES Print Server. Each fault message
contains a fault code and a digital time stamp. When you call for service,
the service center may ask you for this information.
To display the recent fault list:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key to highlight SYSTEM INFORMATION.
3. Press the Enter key to select SYSTEM INFORMATION. The
SYSTEM INFORMATION menu screen is displayed.
4. Press the Next key to highlight RECENT FAULT LIST.
5. Press the Enter key to select RECENT FAULT LIST. The
RECENT FAULT LIST screen is displayed. Below is an example
of the RECENT FAULT LIST screen.
PRINTER
FINISHER
DocuWide 6030/6050