Scanning To The Network (Scan Mode) - Xerox 6030 User Manual

Scanning to the Network (SCAN
mode)
Xerox 6030/6050 Wide Format Copy System
Scanning to the Network (SCAN
mode)
The WIDE FORMAT COPY SYSTEM has two scanning modes of
operation: COPY mode and SCAN mode.
NOTE: The SCAN mode is optional on the Xerox 6030/6050 Wide
Format. Scan-to-Net is an available option for all Xerox 6030/6050 Wide
Format equipped with the WIDE FORMAT SCAN SYSTEM. The Color
Scan-to-Net feature requires a separately purchased, Color Enablement
feature key.. For ordering information, contact your XEROX
representative.
NOTE: The COPY mode will be disabled and the READY TO COPY
screen will not be accessible when the SCAN OPTION (COLOR) is
enabled and a color printer is connected to the AccXES Print Server.
In COPY mode, documents are scanned and temporarily stored
in memory or on the AccXES Print Server internal hard disk, and
then sent to the local Printer as soon as the Printer is available.
When the next job is scanned, the file from the previous job is
automatically deleted from the hard disk, making room for new
files. Operation of the system works as described in the previous
sections.
In SCAN mode, the image file created by scanning is stored
directly on the AccXES Print Server hard disk for later retrieval
over a connected network by a remote system. The image is
stored in Tagged Image File Format (TIFF) 6.0 using CCITT
Group 4, CALS compression, Packbits, or PDF. High resolution
JPG files are also available with the Color Scan-to-Net option.

Scanning to the Network (SCAN mode) 81