Password - Xerox 6030 User Manual

READ NVR

PASSWORD

Xerox 6030/6050 Wide Format Copy System
17. Press the Exit key to return to the Component Tests menu
screen.
The READ NVR option allows the examination of the contents of the
non-volatile RAM (NVR). The service center may ask you to provide this
information when calling for service.
To run the READ NVR diagnostic:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The
DIAGNOSTICS menu screen is displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the Enter key to select SCANNER DIAGNOSTICS. The
SCANNER DIAGNOSTICS menu screen is displayed.
6. Press the Next key until READ NVR is highlighted.
7. Press the Enter key to select READ NVR. The READ NVR
screen is displayed. An "xx" displays for all the NVR values.
00 -07: xx xx xx xx xx xx xx xx
08 - 0F: xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
10-17:
18-1F: xx xx xx xx xx xx xx xx
PRESS START TO BEGIN
8. Press the Start key to display the actual values.
9. Press the Previous or Next key to scroll through the values.
There are 16 rows of values in all.
10. Press the Exit key to return to the SCANNER DIAGNOSTICS
screen.
The PASSWORD option of the DIAGNOSTICS menu is for use by the
Customer Service Engineer only. It allows the Customer Service
Engineer to enter the password for access to password-protected
diagnostic functions.
If you select this option, the PASSWORD screen is displayed. You
cannot perform any functions in this screen. Press the Exit key to return
to the COMPONENT TESTS menu screen.
ENTER PASSWORD:
READ NVR
PASSWORD
Main Menu 131