Cleaning And Maintenance - Scan System - Xerox 6030 User Manual

Xerox 6030/6050 Wide Format Copy System
Cleaning and maintenance - SCAN
SYSTEM
For the SCAN SYSTEM to do its best job, the Platen Glass, Document
Drive Rolls, Backer Roll, Calibration Strip, and Document Feed Tray
must be kept clean. This requires some daily and monthly cleaning and
maintenance activities.
Daily activities
Clean the Platen Glass, Document Drive Rolls, and Backer Roll. See the
"Cleaning the Platen Glass and Document Drive Rolls" section on the
next page.
Inspect the Document Feed Tray and clean as required.
Monthly activities
Clean the Calibration Strip. See the "Cleaning the Calibration Strip"
section on the next page.
Inspect the Platen Glass for chips and scratches.
If the Platen Glass is chipped or scratched, and these defects are visible
in the scanned images, call XEROX service.
The following illustration depicts the SCAN SYSTEM components that
require cleaning.
A
A: Platen Glass
B: Backer Roll
C: Document Drive Rolls (rear)
D
C
B
D: Document Drive Rolls (front)
E: Document Feed Tray
E
Job Accounting 137