Operation At The Receiving System - Kyocera ECOSYS M2530dn Operation Manual

Encryption Box:
1 *Off
*********************
2 On
Box Number Entry: M b
(0000 - 9999)

Operation at the Receiving System

To conduct encryption communication operating the receiving system, follow the steps below.
NOTE:
In encryption communication, sub address communication cannot be used.
Encryption RX:
1 *Off
2 On
*********************
a b
****0000*
a b
11
Press the  or  key to select [On] or [Off].
NOTE:
When the machine receives originals, the
encryption box is not used.
12
Press the OK key. Proceed to the next step or step 15
when [On] or [Off] is selected in step 11, respectively.
13
Use the numeric keys to enter the box number (0000 to
9999).
14
Press the OK key three times.
15
Press the Start key. The transmission will start.
1
Register the encryption key you have arranged with the
sending system. (Refer to Registering an Encryption Key
on page 6-29.)
2
Press the System Menu/Counter key.
3
Press the  or  key to select [FAX].
4
Press the OK key.
5
Press the  or  key to select [Reception].
6
Press the OK key.
7
Press the  or  key to select [Encryption RX].
8
Press the OK key.
9
Press the  or  key to select [On].
10
Press the OK key.
6-32
Setup and Registration