Changing The Interface Parameters; Changing Network Interface Parameters - Kyocera KM-2540 Operation Manual

Changing the Interface Parameters

The machine is equipped with both parallel and USB interfaces. Optional network interface
card can also be installed. Various printing environment parameters such as the default
emulation can be changed independently on different interfaces by using the machine's
menu selection system. Select the interface to apply the changes in the procedure
described below.
NOTE:
data will be received. The machine automatically selects the interface.

Changing Network Interface Parameters

This machine supports TCP/IP, IPX/SPX, NetBEUI, and Appletalk protocols. In addition,
you can install the optional network interface card in the option interface slot.
Using the operator panel, you can:
•
•
•
•
NOTE:
network interface.
TCP/IP
Turn this setting On when this machine is connected to a Windows network, etc., using
TCP/IP.
This interface selection described below does not select the interface from which
Activate or deactivate TCP/IP, NetWare, and AppleTalk
Activate or deactivate DHCP
Enter IP address, subnet mask address, and default gateway address
Determine whether to print a network status page when the machine is turned on
The operations of the optional network interface are the same as those of the
Selecting the Printer Settings
Interface
Setting Item
NetWare On
TCP/IP On
AppleTalk On
Network Status Page On
Network USB
Printer menu
Interface
Setting Item
NetWare On
TCP/IP On
AppleTalk On
Opt. Status Page On
Network USB
Printer menu - Interface
Value
Change #
Value
Change #
Option
2-5