Using The Optional Hard Disk - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings
IMPORTANT: To activate RAM disk in the printer's memory, first you must set the RAM
disk mode to On and set the desired size for the RAM disk.
1 Access RAM DISK Mode, refer to Activating the RAM Disk on page 2-35.
2
Press [RAM DISK Size].
3
Press [+] or [-] or use the numeric
keys to enter the RAM disk size.
4
Press [Close].
When memory size is changed, Do you want to restart immediately? is displayed.
5
Press [Yes].
The machine restarts and the RAM disk size is changed.

Using the Optional Hard Disk

Installing the optional hard disk into the printer allows you to use all of the e-MPS function.
To use the e-MPS function, refer to e-MPS Function on page 2-38. This allows you to
perform the following operations on the hard disk.
•
•
•
•
•
NOTE:
to the relevant sections Using the Memory Card on page 2-30.
Formatting a Hard Disk
When a hard disk is inserted into the printer for the first time, it must be formatted before
use.
2-36
Writing Data
Printing a List of Data Names (Partitions)
Reading Data (Data and Program Data)
Deleting Data (Data, Program Data, Font Data, and Macro Data)
Formatting a Hard Disk
The operations of the hard disk are the same as those of the memory card. Refer
RAM DISK Mode
Read
Write Data
Off
List of
On Partitions
RAM Disk
Size
Printer menu
RAM DISK Size
The memory size to use as RAM disk can be set.
16
MB
Printer menu - RAM DISK Mode
Back
Delete
Back