Changing Network Interface Parameters - Kyocera FS-2020D Operation Manual

Network
TCP/IP
>
Off
>TCP/IP (IPv6)
Off
4-4

Changing Network Interface Parameters

This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP,
SSL Server, IPSec protocols, and Security Level. For more information,
refer to the Advanced Operation Guide.
Note After all network related settings have been done, turn the
machine OFF and ON again. This is mandatory to make the
settings effective.
TCP/IP, TCP/IP (IPv6) settings
1
Press [MENU].
2
Press or
>
3
Press . Each time you press
to the explanations below when specifying the settings.
Set this item to On when you connect to a network using TCP/IP.
Submenu has items including DHCP, IP Address, Subnet Mask,
Gateway and Bonjour.
Set this item to On when you connect to a network using TCP/IP
(IPv6). Submenu has items including RA(Stateless)and
DHCPv6.
repeatedly until Network > appears.
or , the selection changes. Refer
Connecting and Printing