Resource Protect Mode; Auto Error Clear Setting - Kyocera KM-2540 Operation Manual

6 Press [Close] and returns to the Others screen.
7 Press [Close] and returns to the Printer menu screen.

Resource Protect Mode

The Resource Protect Mode protects the resource data such as downloaded fonts and
macros and memorizes the PCL resources even if the emulation mode is switched Off. If
you select Permanent, temporary resources are not protected. If you select Permanent/
Temporary, temporary resources are protected.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-46.
2
Press or
Protect and press [Change #].
3
Press [Off], [Permanent], or [Permanent/Temporary].
4
Press [Close] and returns to the Others screen.
5 Press [Close] and returns to the Printer menu screen.

Auto Error Clear Setting

If an error that still allows you to continue printing occurs, the next received data is
automatically printed after a set period of time elapses. For example, if the printer is shared
over a network as a network printer and one person causes one of the above errors, after
the set period of time elapses, the data sent from the next person is printed. The default
setting is Off (Auto Error Clear disabled). The auto clear errors are:
• Print overrun Press GO.
• Memory overflow Press GO.
You can also set the time that elapses before Auto Continue is activated.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-46.
to select Resource
Selecting the Printer Settings
Others
Setting Item Value
Form Feed Time Out 30 Sec.
Resource Protect Permanent
Auto Continue Off
Finishing Error
Printer menu
Change # Service
2-47