Kyocera KM-2540 Operation Manual page 23

10 Press [Off] and press [Close].
11 Press or
and press [Change #].
12
Use the numeric keys to enter the
address. Enter the 3-digit address in
the highlighted area and press the [#]
key.
13
Enter the next 3-digit address and
press the [#] key.
To modify the entered address, press
the [#] key to select the 3-digit
address to be modified and use the
numeric keys to enter the address
again.
14
Use the same procedure to enter the
remaining address and then press
[Close]. The display returns to the
TCP/IP screen.
If you press [Back], the entered
address is cleared and the previous
address is set again.
15
Press or to select Subnet Mask
and press [Change #].
16
Enter the Subnet Mask address using the same procedure used for the IP Address in steps
12 through 14 of IP Address Setting.
to select IP Address
Selecting the Printer Settings
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
nterface - Network - TCP/IP
IP Address
Confirm per 3 lines pressing # key.
192 0
Printer menu - Interface - Network
IP Address
Confirm per 3 lines pressing # key.
192 168
Printer menu - Interface - Network
IP Address
Confirm per 3 lines pressing # key.
192 168
Printer menu - Interface - Network
Setting Item
DHCP
BOOTP
IP Address
Subnet Mask
Gateway
nterface - Network
Back Close
Value
Off
Off
192. 1 68 . 110. 204
255. 255. 248. 0
Change #
192. 1 68 . 39. 254
Back
(with #key)
0 0
- TCP/IP
Back
(with #key)
0 0
- TCP/IP
Back
(with #key)
110 204
- TCP/IP
Back Close
Value
Off
Off
192. 1 68 . 110. 204
255. 255. 248. 0
Change #
192. 1 68 . 39. 254
2-7