Procedure For Making Settings; Procedure - Kyocera KM-2540 Operation Manual

1 Procedure for Making Settings

This chapter explains how to use the operator panel to configure the printer function and
shows the hierarchy diagram of the menu selection.

Procedure

To enter the printing function, perform the following procedure.
1
Press the [Print] key. The machine enters the
printer mode.
2
Press [Printer Menu] or [e-MPS]. The
Printer Menu or e-MPS screen will
appear.
3
Select the desired settings that you
want to make. For details, refer to
Selecting the Printer Settings on
page 2-1.
4 When the setting is completed, press [Close]. The setting is decided, returns to the before
screen.
NOTE:
value is set again.
To cancel the setting, press [Back]. The setting value is cleared and the previous
Ready to print.
e-MPS
Printer
Menu
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Cancel
Others
1-1