Paper Handling; Mp Tray Mode - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings

Paper Handling

The following settings are available:
•
•
•
•
•

MP Tray Mode

The MP(Multi Purpose) tray can be used in either of two modes — Cassette or First. The
MP tray feed paper differently depending on the mode:
Cassette (default) The MP tray acts in the same manner as other paper sources. The
First
1 Press the [Print] key. The machine enters the printer mode.
2
Press [Printer Menu].
3
Press [Paper Handling].
2-26
MP Tray Mode
Selecting the Paper Feed Source
Duplex Print Mode
Output Destination
Overriding Difference between A4 and Letter
Item
printer can feed paper from any paper source you command on the
printer driver. The cassette mode provides a faster printing speed
than the first mode.
The MP tray automatically feeds paper placed on the MP tray
overriding another paper source that is selected on the printer driver.
After all sheets in the MP tray have been used up (approximately 200
sheets), paper will be fed from the paper source originally selected.
This mode is convenient to feed paper of special size or type without
reloading the current paper source. However, the MP tray must be
kept empty if you desire to feed paper from the intended paper
source.
Description
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Others