Changing Network Interface Parameters - Kyocera FS-2100DN Operation Manual

Changing Network Interface Parameters

This printer supports TCP/IP (IPv4), TCP/IP (IPv6), IPP, SSL Server and the IPSec protocols and Security Level.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
Menu
Network
Submenu
TCP/IP Settings TCP/IP
IPv4 Setting
IPv6 Setting
Protocol Detail
Restart Network
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
Bonjour
TCP/IP(IPv6)
RA(Sateless)
DHCPv6
NetBEUI
SNMPv3
FTP(Server)
SNMP
SMTP
POP3
RAW Port
LPD
HTTP
LDAP
2-2
Preparation before Use
Setting
On/Off
On/Off
On/Off
IP address
IP address
IP address
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
Yes/No