Using Proof-And-Hold - Kyocera KM-2540 Operation Manual

4
Press or
name required and press [Next].
5 Press or to select a job required
and press [Next].
NOTE:
If you want to delete a job, press
[Delete].
6
Press [+] or [-] or use the numeric
keys to enter the number of copies
and press [Printing].
The message Processing data
appears and the printing starts.
7
After the printing is finished, and returns to the Printer menu screen.

Using Proof-and-Hold

When you print multiple copies, this mode first prints one copy so that you can proof it
before continuing to print the remaining copies. Since you can proof the printouts before
printing the remaining copies, wastage of paper can be reduced.
The printer prints one copy and, at the same time, saves the print job on the hard disk. You
can also change the number of copies when resuming printing from the operator panel.
When the printer is turned off, all stored jobs will be deleted.
Printing Remaining Copies of a Proof and Hold Job
Printing a Proof-and-Hold job on the operator panel is the same as printing a quick copy
job. Refer to the relevant sections Printing a Quick Copy on page 2-38.
to select the user
Selecting the Printer Settings
Select the user name.
User
DataH001
DataH002
DataH003
DataH004
DataH005
DataH006
DataH007
e-MPS
Quick Copy
Job
DataH001
DataH002
DataH003
DataH004
DataH005
DataH006
DataH007
e-MPS
or to select a job required and press
Quick Copy
(1 ~ 999)
10
Set
e-MPS
Up
Down
Up
Down
(Enter with #-key)
2-39