Storage Error Codes; Ram Disk Errors; Memory Card Errors - Kyocera KM-2540 Operation Manual

Troubleshooting

Storage Error Codes

RAM Disk Errors

Check the error code displayed in place of ## and refer to the following.
01
02
03
04
05
06
98

Memory Card Errors

Check the error code displayed in place of ## and refer to the following.
01
02
03
04
05
3-4
Code
Format error. Turn power off and on again.
The RAM disk mode is off. Turn it on.
A write error has occurred. Turn off write protection.
The RAM disk does not have enough area to store the data. Delete any
unnecessary data to make more room.
The selected file could not be found. Check the file name and whether it is
on the RAM disk or not.
There is not enough system memory. Increase memory capacity.
Some of the data being collated was not read. Job data is corrupt.
Code
Format error. Reformat the memory card.
Memory card load error. Correctly load the memory card.
A write error has occurred. Turn off write protection.
The memory card does not have enough area to store the data. Delete any
unnecessary data to make more room.
The selected file could not be found. Check the file name and whether it is
on the memory card or not.
Meaning
Meaning