Changing The Interface Parameters - Kyocera TASKalfa 820 Operation Manual

Changing the Interface Parameters

The machine is equipped with both parallel and USB interfaces. Optional network interface card can
also be installed. Various printing environment parameters such as the default emulation can be
changed independently on different interfaces by using the machine's menu selection system.
Select the interface to apply the changes in the procedure described below.
Note
This interface selection described below does not select the interface from which data will be
received. The machine automatically selects the interface.
Selecting the Printer Settings
Interface
Default menu
Send & receive mode Auto
Parallel Network
Printer menu
Interface
Setting Item
NetWare On
TCP/IP
On
Ethertalk On
Network Status Page On
Parallel Network
Printer menu - Interface
Setting mode
Change #
USB
Value
Change #
USB Option
2-5