Restart; Received Data Dump - Kyocera KM-2540 Operation Manual

Selecting the Printer Settings
3 Press [Print Status Page].
4 Press [Printing].
The message Processing data appears and the machine prints a service status page or
test page.
5
After the service status page is printed, the display returns to the Printer menu screen.

Restart

To reset only the printer board without the need to turn off to the machine, perform the
following procedure. All of the printing data and waiting data are deleted when this machine
is restarted.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-46.
2
Press [Printer Reset].
Only printer board is working without
turning off the main SW. Are you
sure? is displayed.
3
Press [Yes].
Restart is executed.

Received Data Dump

You can print data received by the printer as hexadecimal code for debugging programs
and files.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-46.
2-50
Service
Print Sta-
tus Page
Paper Feed
Printer menu - Others
Item Value
e Out 30 Sec.
ect Permanent
Off
Change #
Close
Printer
Reset
Print
Service
HEX-DUMP