Default Font; Selecting The Default Font - Kyocera KM-2540 Operation Manual

Default Font

You can select the default font for the current interface. The default font can be one of the
internal fonts or a font that is downloaded to the machine memory or stored on memory
card or hard disk.
The following settings are available:
•
•
•
•
•
•
NOTE:

Selecting the Default Font

1 Press the [Print] key. The machine enters the printer mode.
2
Press [Printer Menu].
3
Press [Font].
4
Press [Font selection].
5
Select the desired interface tab.
Selecting the Default Font
Changing the Default Font Size
Character Pitch for Courier/Letter Gothic
Selecting Regular or Dark Courier/Letter Gothic
Setting the Code Set
Printing Lists of Fonts
You can set the font for each interface.
Selecting the Printer Settings
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Font
Font
selection
Printer menu
Font
I000
Font ID
Network USB
Printer menu - Font
Others
Back
Code Set
Code Set
Back
Courier
Internal
Dark
Detail
2-13