Kyocera KM-2540 Operation Manual page 47

5 Insert the Memory Card into the slot with the front
of the card facing the rear of the machine.
Formatting a Memory Card
A new memory card must be formatted before it can be used in the machine. Formatting
allows data to be written to the memory card.
IMPORTANT: Formatting will destroy any existing data on a storage device including a
used memory card. Formatting of the memory card must be executed from this machine.
1
Press the [Print] key. The machine enters the printer mode.
2
Press [Printer Menu].
3 Press [Memory Card].
4 Press [Format].
All data in the memory card will be
delete. Are you sure? is displayed.
5 Press [Yes].
Formatting of the memory card starts.
6
Formatting is finished, the display returns to the Printer menu screen.
Writing Data
Data can be written to a memory card until the card is full. When writing to a memory card,
a name is assigned to the file automatically. You can use the procedure explained in the
section Printing a List of Data Names (Partitions) on page 2-33 to print a list of data names
for confirmation.
Selecting the Printer Settings
Select item.
Printer menu
Print Sta- Paper
Font
tus Page Handling
Interface Page Set
Print RAM DISK
Emulation
Quality Mode
Memory Card
Read
Write Data
List of
Data
Partitions
Format Font
Printer menu
Others
Memory
Delete
Language
Program Data
Macro Font
2-31