Other Modes; Automatic Form Feed Timeout Setting - Kyocera TASKalfa 820 Operation Manual

Selecting the Printer Settings

Other modes

The following modes can be accessed in the Others submenu:
•
•
•
•
•
•
•

Automatic Form Feed Timeout Setting

If this machine does not receive any information indicating the end of data after receiving the last
data, the machine waits for a certain time without printing the last page. When the preset time
elapses, the machine automatically performs a form feed. If you set the time to 0, the machine does
not perform a form feed until GO is manually selected.
1 Press the [Printer] key. The machine enters the printer mode.
2 Press [Printer Menu].
3 Press [Others].
4 Press  or  to select Form Feed Time
Out and press [Change #].
5 Press [+] or [-] or use the numeric keys
to enter the form feed time.
The timeout time can be between 0 and
495 seconds, in 5-second increments.
6
Press [Close] and returns to the Others screen.
7 Press [Close] and returns to the Printer menu screen.
2-44
Automatic Form Feed Timeout Setting
Resource Protect mode
Auto Error Clear Setting
Stapling Error Detection
Printing the Service Status Page
Restart
Received Data Dump
t item.
Paper
Font
Handling
Page Set
Print
QUality
Others
Setting Item Value
Form Feed Time Out 30
Resource Protect Permanent
Auto Continue Off
Finishing Error
Printer menu
Form Feed Time Out
(0 ~ 495)
30
Printer menu - Others
Hard Disk Others
Sec.
Change # Service
Seconds
(5)
(5)
C
Back