Auto Clear Setting; Auto Sleep Setting - Kyocera TASKalfa 180 Operation Manual

System Menu
Silent Mode Transition Time
Shortens the amount of time the internal motor continues to run after the copy is produced. Use this setting in
cases when the motor noise is bothersome.

Auto Clear Setting

Set whether or not to automatically return the copier to Ready to copy. state when copying is finished.

Auto Sleep Setting

Set whether or not to automatically enter Sleep Mode when copying is completed or after operations have been
finished.
5-20
System Menu:
49.Silent mode
System Menu:
50.Auto Clear
3
Press to select On when the sets of
or
copied documents are to be rotated and Off when
no rotation is to be performed, and then press the
OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 49.Silent mode,
or
and then press the OK key.
3
Press to select the amount of time for
or
transition into Silent Mode, and then press the OK
key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2
Press to select select 50.Auto Clear,
or
and then press the OK key.
3
Press to select On in the case where the
or
transition to Auto Clear is to be made or Off when
it is not, and then press the OK key.
The display will return to that of Step 2.
1
Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
OPERATION GUIDE