Snmpv3 Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 84 System SNMP Configuration Menu options
Command
cur

SNMPv3 configuration

Command: /cfg/sys/ssnmp/snmpv3
[SNMPv3 Menu]
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework
by supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture please see RFC2271 to RFC2275.
The following table describes the SNMPv3 Configuration Menu options.
SNMPv3 Configuration Menu options
Table 85
Command
usm <1-16>
view <1-128>
access <1-32>
group <1-16>
comm <1-16>
Description
Displays the current SNMP configuration.
usm - usmUser Table Menu
view - vacmViewTreeFamily Table Menu
access - vacmAccess Table Menu
group - vacmSecurityToGroup Table Menu
comm - community Table Menu
taddr - targetAddr Table Menu
tparam - targetParams Table Menu
notify - notify Table Menu
v1v2 - Enable/disable V1/V2 access
cur - Display current SNMPv3 configuration
Description
Configures a user security model (USM) entry for an authorized user. You can also
configure this entry through SNMP. The range is 1-16.
Configures different MIB views. The range is 1-128.
Configures access rights. The View-based Access Control Model defines a set of
services that an application can use for checking access rights of the user. You need
access control when you have to process retrieval or modification request from an
SNMP entity. The range is 1-32.
Configures an SNMP group. A group maps the user name to the access group names
and their access rights needed to access SNMP management objects. A group defines
the access rights assigned to all names that belong to a particular group. The range is
1-16.
Configures a community table entry. The community table contains objects for
mapping community strings and version-independent SNMP message parameters. The
range is 1-16.
Configuration Menu
115