Statistics Menu; Introduction; Menu Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Statistics Menu

Introduction

You can view switch performance statistics in the user, operator, and administrator command modes. This
chapter discusses how to use the CLI to display switch statistics.

Menu information

Command: /stats
[Statistics Menu]
The following table describes the Statistics Menu options.
Statistics Menu options
Table 44
Command
port <port number>
l2
l3
mp
acl
snmp
ntp <clear>
ufd <clear>
clrmp
port - Port Stats Menu
l2 - Layer 2 Stats Menu
l3 - Layer 3 Stats Menu
mp - MP-specific Stats Menu
acl - ACL Stats Menu
snmp - Show SNMP stats
ntp - Show NTP stats
ufd - Show Uplink Failure Detection stats
clrmp - Clear all MP related stats
dump - Dump all stats
Usage
Displays the Port Statistics Menu for the specified port. Use this command to display
traffic statistics on a port-by-port basis. Traffic statistics are included in SNMP
Management Information Base (MIB) objects.
Displays the Layer 2 Statistics Menu.
Displays the Layer 3 Statistics Menu.
Displays the Management Processor Statistics Menu. Use this command to view
information on how switch management processes and resources are currently being
allocated.
Displays the Access Control List Statistics Menu.
Displays SNMP statistics.
Displays Network Time Protocol (NTP) Statistics.
You can execute the clear command option to delete all statistics.
Displays Uplink Failure Detection statistics.
Add the argument, clear, to clear UFD statistics.
Clears all Management Processor statistics.
Statistics Menu
70