Ip Forwarding Configuration; Network Filter Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

The following table describes the Static ARP Configuration Menu options.
Static ARP Configuration Menu options
Table 126
Command
add <IP address> <MAC address>
<VLAN number> <port number>
del <IP address (such as,
192.4.17.101)>
clear [<interface number>|<VLAN
number>|<port number>|all] <ARP
entry number>
cur

IP Forwarding configuration

Command: /cfg/l3/frwd
[IP Forwarding Menu]
The following table describes the IP Forwarding Configuration Menu options.
Table 127 IP Forwarding Configuration Menu options
Command
dirbr disable|enable
on
off
cur

Network Filter configuration

Command: /cfg/l3/nwf <1-256>
[IP Network Filter
dirbr - Enable/disable forwarding directed broadcasts
on - Globally turn IP Forwarding ON
off - Globally turn IP Forwarding OFF
cur - Display current IP Forwarding configuration
Description
Enables or disables forwarding directed broadcasts. This command is disabled by
default.
Enables IP forwarding (routing) on the switch.
Disables IP forwarding (routing) on the switch. Forwarding is turned off by default.
Displays the current IP forwarding settings.
1 Menu]
addr - IP Address
mask - IP Subnet mask
enable - Enable Network Filter
disable - Disable Network Filter
delete - Delete Network Filter
current - Display current Network Filter configuration
Description
Adds a permanent ARP entry.
Deletes a permanent ARP entry.
Clears static ARP entries.
Displays current static ARP configuration.
Configuration Menu
150