Layer 2 Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 17 User Name information menu
Field
user
oper
admin
Current User ID Table

Layer 2 information

Command: /info/l2
[Layer 2 Menu]
The following table describes the Layer 2 Information Menu options.
Layer 2 Information Menu options
Table 18
Command
fdb
lacp
8021x
stp
Usage
Displays the status of the user access level.
Displays the status of the oper (operator) access level.
Displays the status of the admin (administrator) access level.
Displays the status of configured user IDs. To configure new user IDs, use the
/cfg/sys/access/user/uid command.
fdb - Forwarding Database Information Menu
lacp - Link Aggregation Control Protocol Menu
8021x - Show 802.1x information
stp - Show STP information
cist - Show CIST information
trunk - Show Trunk Group information
vlan - Show VLAN information
gen - Show general information
dump - Dump all layer 2 information
Usage
Displays the Forwarding Database Information Menu.
Displays the Link Aggregation Control Protocol Information Menu.
Displays the 802.1x Information Menu.
In addition to seeing if STP is enabled or disabled, you can view the following STP bridge
information:
Priority
Hello interval
Maximum age value
Forwarding delay
Aging time
You can also refer to the following port-specific STP information:
Port number and priority
Cost
State
Information Menu
36